Current Publications

University of Denver

  1. Middleton, J., Hoffman, J., Burks, B. and Kumosa, M., Aging of a Polymer Core Composite Conductor; Mechanical Properties and Residual Stresses, Composites Part A, 69 (2015), pp. 159-167.
  2. Hoffman, J., Middleton, J. and Kumosa, M., Effect of a Surface Coating on Flexural Performance of Thermally Aged Hybrid Glass/Carbon Epoxy Composite Rods, Composites Science and Technology, Vol. 106 (2015) pp. 141-148.
  3. Hakansson, E., Predecki, P. and Kumosa, M., Comparison of Galvanic Corrosion Performance of HTLS ACCC and Conventional ACSR Conductors, IEEE Transactions on Reliability, Vol. 64, Issue 3 (2015) pp. 928-934.
  4. Allen B., Bleszynski, M., Willis, E., and Kumosa, M., Investigation into the Effects of Environmental Stressors on RTV-1 Silicone-Based Caulk Materials, IEEE Transactions on Dielectrics and Electrical Insulation, 22, Issue 5 (October 2015) pp. 2978-2986.
  5. Hakansson, E., Ricker, R., Predecki, P. and Kumosa, M., Electrochemical In-situ Assessment Method for Galvanic Corrosion in Bare Overhead Transmission Line Conductors, CIGRE Science and Engineering, June 2016, No 5, pp. 38-49.
  6. Lu, T., Solis-Ramos, E., Yi, Y., and Kumosa, M., Synergetic Environmental Degradation of High Voltage Glass Reinforced Polymer Composites, Polymer Degradation and Stability, 131, Sep. 2016, pp. 1-8.
  7. Bleszynski, M. and Kumosa, M., Silicone Rubber RTV Aging in the Presence of Aqueous Salt, IEEE Transactions on Dielectrics and Electrical Insulation, Vol. 23. No. 5 (2016) pp. 2822-2829.
  8. Hakansson, E, Hoffman, J., Predecki, P. and Kumosa, M., The Role of Corrosion Product Deposition in Galvanic Corrosion, Corrosion Science, Vol. 114 (2016 ) pp. 10-16.
  9. Solis-Ramos, E. and Kumosa, M., Synergistic Effects in Stress Corrosion Cracking of Glass Reinforced Polymer Composites, J. Polymer Degradation in Stability, Vol. 136 (2017) pp. 146-157.
  10. Waters, D., Hoffman, J., Hakansson, E. and Kumosa, M., Low Velocity Impact To Transmission Line Conductors, J. Impact Engineering, Vol. 106 (2017) pp. 64-72.
  11. Grell, W., E. Solis-Ramos, E., Clark, E, Lucon, E. Garboczi, E., Predecki, P., Loftus, Z., and Kumosa, M.,   Effects of Powder Oxidation on Impact Toughness of Electron Beam Melt Ti-6Al-4V, Additive Manufacturing, Vol. 17 (2017) pp. 123-134.
  12. Bleszynski, M and Kumosa, M., Silicone Rubber Aging in Electrolyzed Aqueous Salt Environments, Polymer Degradation and Stability, Vol. 146 (2017) pp. 61-68.
  13. Lu, T., Solis-Ramos, E., YI, Y., and Kumosa, M., Particle Removal Mechanisms in Synergistic Aging of Polymers and Glass Reinforced Polymer Composites under Combined UV and Water, Composites Science and Technology, Vol. 153 (2017) pp. 273-181.
  14. Bakir, M., Henderson, NC, Meyer, J. J., Oh, J., Miljkovic, N., Kumosa, M., Economy, J., and Jasiuk, I., Effects of Environmental Aging on Physical Properties of Aromatic Thermosetting Copolyester Matrix Neat and Nanocomposite Foams, Polymer Degradation and Stability, Vol. 147 (2018) pp. 49-56.
  15. Bleszynski, M. and Kumosa, M., Aging Resistant TiO2/Silicone Rubber Composites, Composites Science and Technology, Vol. 164 (2018) pp. 74-81.
  16. Lu, T., Solis-Ramos, E., YI, Y., and Kumosa, M., UV Degradation Model for Polymers and Polymer Matrix Composites, Polymer Degradation and Stability, Vol 154 (2018) pp. 2013-210.
  17. Waters, , Hoffman, J. and Kumosa, M., Monitoring of Overhead Transmission Conductors Subjected to Static and Impact Loads using Fiber Bragg Grating Sensors, IEEE Transactions on Instrumentation and Measurement, Sep 2018 DOI: 10.1109/TIM.2018.2851698.
  18. Henderson, C., DeFrance, C., Hoffman, J., Predecki, P. and Kumosa, M., Ballistic Fragmentation Confinement of Coated Brittle Transformer Bushing Models, J. Impact Engineering, Vol. 122 (Dec 2018) pp. 363-373.
  19. Hoffman, J., Waters, D., Khadka, S., and Kumosa, M., Shape Sensing of Modern Electrical Transmission Lines Using FBG Sensors, IEEE Transaction on Instrumentation and Measurement, submitted on Sept 21, 2018.

Michigan Tech

  1. Chinkanjanarot, S., J.M. Tomasi, J.A. King, G.M. Odegard, “Thermal Conductivity of Graphene Nanoplatelet/Cycloaliphatic Epoxy Composites: Multiscale Modeling”, Carbon, Vol. 140, pp. 653-663 (2018)
  2. Tomasi, J.M., A.S. Krieg, N.J. Jensen, I. Miskioglu, J.A. King, G.M. Odegard, “Accelerated Hygrothermal Aging of Talc Nanoparticle/Cycloaliphatic Epoxy Composites”, Polymer composites, accepted for publication
  3. Krieg, A., J. King, D. Jaszczak, I. Miskioglu, O. Mills, G.M. Odegard, “Tensile and Conductivity Properties of Carbon Black/Epoxy, Graphene Nanoplatelet/Epoxy, and Carbon Black/Graphene Nanoplatelet/Epoxy Composites”, Journal of Composites Materials, accepted for publication
  4. Radue, M.S., G.M. Odegard, “Multiscale Modeling of Carbon Fiber/Carbon Nanotube/Epoxy Hybrid Composites: Comparison of Epoxy Matrices”, Composites Science and Technology, Vol. 166, pp. 20-26 (2018)
  5. Chinkanjanarot, S., M.S. Radue, S. Gowtham, J.M. Tomasi, D.R. Klimek-McDonald, J.A. King, G.M. Odegard, “Multiscale Thermal Modeling of Cured Cycloaliphatic Epoxy/Carbon Fiber Composites”, Journal of Applied Polymer Science, Vol. 135, no. 25, 46371 (2018)
  6. Tomasi, J.M., J.A. King, A.S. Krieg, I. Miskioglu, G.M. Odegard, “Thermal, Electrical, and Mechanical Proerties of Talc- and Glass Microsphere-Reinforced Cycloaliphatic Epoxy Nanocomposites”, Polymer Composites, Vol. 39, no. S3, pp. E1581-E1588 (2018)
  7. King, J.A., J.M. Tomasi, D.R. Klimek-McDonald, I. Miskioglu, G.M. Odegard, T.R. King, J.W. Sutherland “Effects of Carbon Fillers on Conductivity and Tensile Properties of Polyetheretherketone (PEEK) Composites”, Polymer Composites, Vol. 39, no. S2, pp. E807-E816 (2018)
  8. Klimek-McDonald, D.R., J.A. King, I. Miskioglu, E.J. Pineda, G.M. Odegard, “Determination and Modeling of Mechanical Properties for Graphene Nanoplatelet/Epoxy Composites”, Polymer Composites, Vol. 39, no. 6, pp. 1845-1851 (2018)
  9. Radue, M.S., B.D. Jensen, S. Gowtham, D.R. Klimek-McDonald, J.A. King, G.M. Odegard, “Comparing the Mechanical Response of Di-, Tri-, and Tetra-functional Resin Epoxies with Reactive Molecular Dynamics”, Journal of Polymer Science Part B: Polymer Physics, Vol. 56, pp. 255-264 (2018)
  10. M. Tomasi, I.D. Helman, W.A. Pisani, D.R. Klimek-McDonald, S. Chinkanjanarot, I. Miskioglu, J.A. King, G.M. Odegard, “Accelerated hydrothermal aging of cycloaliphatic epoxy/graphene nanoparticle composites”, Polymer Degradation and Stability, Vol. 133, pp. 131-135 (2016)
  11. King, J.A., W.A. Pisani, D.R. Klimek-McDonald, W.F. Perger, G.M. Odegard, D.G. Turpeinen, “Shielding Effectiveness of Carbon Filled Polypropylene Composites”, Journal of Composite Materials, Vol. 50, no. 16, pp. 2177-2189 (2015)
  12. Hadden, C.M., D.R. Klimek-McDonald, E.J. Pineda, J.A. King, A.M. Reichanadter, I. Miskioglu, S. Gowtham, G.M. Odegard, “Mechanical Properties of Graphene Nanoplatelet/Carbon Fiber/Epoxy Hybrid Composites: Multiscale Modeling and Experiments”, Carbon, Vol. 95, pp. 100-112 (2015)
  13. King, J.A., W.A. Pisani, D.R. Klimek-McDonald, W.F. Perger, G.M. Odegard, “Shielding Effectiveness of Carbon Filled Polycarbonate Composites”, Journal of Applied Polymer Science, Vol. 132, no. 43, 42719 (2015)
  14. King, J.A., D.R. Klimek, I. Miskioglu, G.M. Odegard, “Mechanical Properties of Graphene Nanoplatelet/Epoxy Composites”, Journal of Composite Materials, Vol. 49, no. 6, pp. 659-668 (2015)

 

University of Illinois at Urbana-Champaign

  1. Kale and M. Ostoja-Starzewski, “Elastic-plastic-brittle transitions and avalanches in disordered media,” Physical Review Letters 112, 045503-1-5, 2014. DOI: 10.1103/PhysRevLett.112.045503.
  2. Kale and M. Ostoja-Starzewski, “Morphological study of elastic-plastic-brittle transitions in disordered media,” Physical Review E 90, 042405-1-15, 2014. DOI: 10.1103/PhysRevE.90.042405.
  3. Kale, F. A. Sabet, I. Jasiuk, and M. Ostoja-Starzewski (2015), “Percolation Behavior of Polydisperse Prolate and Oblate Ellipsoids,” Journal of Applied Physics 118 (15), 154306. DOI:10.1063/1.4933100.
  4. Kale, A. Saharan, S. Koric and M. Ostoja-Starzewski, “Scaling and bounds in thermal conductivity of planar Gaussian correlated microstructures,” Journal of Applied Physics 117, 104301, 2015. http://dx.doi.org/10.1063/1.4914128.
  5. Zhang and M. Ostoja-Starzewski, “Mesoscale bounds in viscoelasticity of random composites,” Mechanics Research Communications 68, 98-104, 2015. doi:10.1016/j.mechrescom.2015.05.005
  6. Kale, F. Sabet, I. Jasiuk, M. Ostoja-Starzewski, “Tunneling-percolation behavior of polydisperse prolate and oblate ellipsoids,” Journal of Applied Physics 118(15), 154306, 2015. DOI: 10.1063/1.4933100 cover.
  7. I. Barabash, V. Agarwal, S. Koric, I. Jasiuk and J.Z. Tischler (2016), “Finite Element Simulation and X-ray Microdiffraction Study of Strain Partitioning in a Layered Nanocomposite,” Journal of Applied Crystallography, 4351347 (11 pages).
  8. Kale, F. A. Sabet, I. Jasiuk, and M. Ostoja-Starzewski (2016), “Effect of Filler Alignment on Percolation in Polymer Nanocomposites using Tunneling-Percolation Model,” Journal of Applied Physics 120 (4), 045105. DOI:10.1063/1.4959610.
  9. Bakir, J.L. Meyer, J. Economy, I. Jasiuk (2016), “Heat Induced Polycondensation Reaction with Self-generated Blowing Agent Forming Aromatic Thermosetting Copolyester Foams,” Macromolecules 49 (17), 6484-6496. DOI:10.1021/acs.macromol.6b00971
  10. Karimi, M. Ostoja-Starzewski, I. Jasiuk (2016), “Experimental and Computational Study of Shielding Effectiveness of Polycarbonate Carbon Nanocomposites,” Journal of Applied Physics 120, 145103-1-11. DOI:10.1063/1.4964691.
  11. Ostoja-Starzewski, “Second law violations, continuum mechanics, and permeability,” Continuum Mechanics and Thermodynamics 28, 489-501, 2016. DOI: 10.1007/s00161-015-0451-4; Erratum 29, 359, 2017. DOI: 10.1007/s00161-016-0534-x.
  12. Nishawala, M. Ostoja-Starzewski, M. Leamy and P.N. Demmie, “Simulation of elastic wave propagation using cellular automata and peridynamics, and comparison with experiments,” Wave Motion 60, 73-83, 2016. https://doi.org/10.1016/j.wavemoti.2015.08.005.
  13. Zhang and M. Ostoja-Starzewski, “Finite element solutions to the bending stiffness of a single-layered helically wound cable with internal friction,” ASME Journal of Applied Mechanics 83, 031003-1-8, 2016. DOI:10.1115/1.4032023.
  14. Ostoja-Starzewski and B. Raghavan, “Continuum mechanics versus violations of the second law of thermodynamics,” (invited) J. Thermal Stresses 39:6, 734-749, 2016. http://www.tandfonline.com/doi/full/10.1080/01495739.2016.1169140.
  15. Nishawala and M. Ostoja-Starzewski, “Peristatic solutions for finite one and two dimensional systems,” Mathematics and Mechanics of Solids, in press, 2016. DOI: 10.1177/1081286516641180.
  16. Zhang and M. Ostoja-Starzewski, “Frequency-dependent scaling from mesoscale to macroscale in viscoelastic random composites,” Proceedings of the Royal Society A 472, 20150801, 2016. DOI: 10.1098/rspa.2015.0801.
  17. Kale and M. Ostoja-Starzewski, “Representing stochastic damage evolution as a jump Markov process,” International Journal of Damage Mechanics, on line, 2016. DOI: 10.1177/1056789516650249.
  18. Nishawala, M. Ostoja-Starzewski, M. Leamy and E. Porcu, “Lamb’s problem on random mass density fields with fractal and Hurst effects,” Proceedings of the Royal Society A 472 (2196), 2016. DOI: 10.1098/rspa.2016.0638. Electronic supplementary material.
  19. W. Abueidda, M. Bakir, R. K. Abu Al-Rub, J. S. Bergström, N. A. Sobh, I. Jasiuk, (2017), “Mechanical Properties of 3D Printed Polymeric Foams with Triply Periodic Minimal Surface Architectures,” Materials and Design 122, 255-267. DOI:10.1016/j.matdes.2017.03.018.
  20. Bakir, E. Bahceci, J.L.Meyer, J. Economy, I. Jasiuk (2017), “Aromatic Thermosetting Copolyester Foam Core and Aluminum Foam Face Three-Layer Sandwich Composite for Impact Energy Absorption,” Materials Letters 196, 288-291. DOI: 10.1016/j.matlet.2017.03.116.
  21. Hussainova, M. Drozdova, D. Pérez-Coll, F. Rubio-Marcos, I. Jasiuk, J. A.N.T. Soares, M. A. Rodríguez (2017), “Electroconductive Composite of Zirconia and Hybrid Graphene/Alumina Nanofibers,” Journal of the European Ceramic Society 37, 3713-3719. DOI:10.1016/j.jeurceramsoc.2016.12.033.
  22. Bakir, I. Jasiuk (2017), “Novel Metal-Carbon Nanomaterials: A Review on Covetics,” Advanced Materials Letters 8(9), 884-890.
  23. Valdez, C. Kozuch, E.J. Faierson, I. Jasiuk (2017), “Induced Porosity in Super Alloy 718 through the Laser Additive Manufacturing Process: Microstructure and Mechanical Properties,” Journal of Alloys and Compounds 725, 757-764. DOI:10.1016/j.jallcom.2017.07.198
  24. Bakir, J. L. Meyer, J. Economy, I. Jasiuk (2017), “Aromatic Thermosetting Copolyester Nanocomposite Foams: High Thermal and Mechanical Performance Lightweight Structural Materials,” Polymer 123, 311-320. DOI:10.1016/j.polymer.2017.07.030.
  25. Bakir, J. L. Meyer, I. Hussainova, A. Sutrisno, J. Economy, I. Jasiuk (2017), “Periodic Functionalization of Graphene-layered Alumina Nanofibers with Aromatic Thermosetting Copolyester via Epitaxial Step-growth Polymerization,” Macromolecular Chemistry and Physics 218 (24), 1700338. DOI:10.1002/macp.201700338.
  26. Zhang, K.A. Dahmen and M. Ostoja-Starzewski, “Scaling of slip avalanches in sheared amorphous materials based on large-scale atomistic simulations,” Physical Review E 95, 032902-1-12, 2017. DOI: 10.1103/PhysRevE.95.032902.
  27. Ostoja-Starzewski, “Admitting spontaneous violations of the second law in continuum thermomechanics,” Entropy 19, 78, 10 pages, 2017.
  28. Amiri-Hezaveh, H. Moghaddasi, P. Karimi and M. Ostoja-Starzewski, “Dynamic interaction of plates in an inhomogeneous transversely isotropic space weakened by a crack,” ZAMM, on line, 2017.
  29. Le Marrec, D. Zhang and M. Ostoja-Starzewski, “Three-dimensional vibrations of a helically wound cable modeled as a Timoshenko rod,” Acta Mechanica (“Franz Ziegler memorial issue”), in press, 2017.
  30. Nishawala and M. Ostoja-Starzewski, “Acceleration waves on random fields with fractal and Hurst effects,” Wave Motion 74, 134-150, 2017.
  31. Karimi, A. Amiri-Hezaveh, M. Ostoja-Starzewski and J.-M. Jin, “Electromagnetic characteristics of systems of prolate and oblate ellipsoids with focus on CNT and GNP,” Journal of Applied Physics, in press, 2017. DOI: 10.1063/1.5000045.
  32. Bakir, C. N. Henderson, J. L. Meyer, J. Oh, N. Miljkovic, M. Kumosa, J. Economy, I. Jasiuk (2018), “Effects of Environmental Aging on Physical Properties of Aromatic Thermosetting Copolyester Matrix Neat and Nanocomposite Foams,” Polymer Degradation and Stability 147, 49-56. DOI: 10.1016/j.polymdegradstab.2017.11.009.
  33. W. Abueidda, I. Jasiuk, N.A. Sobh (2018), “Acoustic Band Gaps and Elastic Stiffness of PMMA Cellular Solids based on Triply Periodic Minimal Surfaces”, Materials & Design 145, 20-27.
  34. Bakir, J. L. Meyer, A. Sutrisno, J. Economy, I. Jasiuk (2018), “Nanofiller-conjugated percolating conductive network modified polymerization reaction characteristics of aromatic thermosetting copolyester resin,” RSC Advances 8 (9), 4946-4954. DOI: 10.1039/c7ra12506b.
  35. Jasiuk, I., D. Abueidda, C. Kozuch, S. Pang, F. Su, J. McKittrick (2018), “An Overview on Additive Manufacturing of Polymers,” JOM (Journal of the Minerals, Metals and Materials Society) 70 (3), 275-283. DOI: 10.1007/s11837-017-2730-y.
  36. Kale, P. Karimi, F. A. Sabet, I. Jasiuk, M. Ostoja-Starzewski (2018), “Tunneling-percolation model of multicomponent nanocomposites”, Journal of Applied Physics 123, 085104; doi: 10.1063/1.5019945.
  37. Kocyigit, M. Bakir, O. Cifci, B. Enders, I. Jasiuk, M. Nayfeh (2018), “Imparting optical functionality to aromatic thermosetting copolyester by luminescent silicon nanoparticles cross-linked via in situ thermal polymerization reaction,” European Polymer Journal 103, 351-361.
  38. Bakir, M. Elhebeary, J. Meyer, A. Sutrisno, J. Economy, I. Jasiuk (2018), “Interfacial liquid crystalline mesophase domain on carbon nanofillers in aromatic thermosetting copolyester matrix,” Journal of Applied Polymer Science, 46584 (1 of 6); DOI: 10.1002/APP.46584.
  39. A. Sabet, F. Y. Su, J. McKittrick, I. Jasiuk (2018), “Mechanical Properties of Model Two-Phase Composites with Continuous Compared to Discontinuous Phases,” Advanced Engineering Materials, 1800505 (1 of 6); doi.org/10.1002/adem.201800505.
  40. Kozuch, I. Jasiuk (2018), “Optimization of Structures made from Composites with Elliptical Inclusions,” Journal of Applied Mechanics, online. doi: 10.1115/1.4041225.
  41. Bakir, J. L. Meyer, A. Sutrisno, J. Economy, I. Jasiuk (2018), “Aromatic thermosetting copolyester bionanocomposites as reconfigurable bone substitute materials: Interfacial interactions between reinforcement particles and polymer network,” Scientific Reports, 8:14869, DOI:10.1038/s41598-018-33131-5.
  42. Bakir, J. L. Meyer, A. Sutrisno, J. Economy, I. Jasiuk (2018), Glass transition broadening via nonofiller-continguous polymer network in aromatic thermosetting copolyester annocomposites, Journal of Applied Polymer Science: Part B, 46584 (1 of 6). DOI: 10.1002/APP.46584.
  43. A. Varnell, M. Bakir, A. M. DiAscro, X. Chen, S. Nilufar, I. Jasiuk, A. A. Gewirth (2018), “Understanding the influence of carbon addition on the corrosion behavior and mechanical properties of Al alloy “covetics”,” Journal of Materials Science, online. DOI: 10.1007/s10853-018-2998-5.
  44. W. Abueidda, P. Karimi, J.-M. Jin, N.A. Sobh, I. M. Jasiuk, M. Ostoja-Starzewski (2018), “Shielding effectiveness and bandgaps of interpenetrating phase composites based on the Schwarch Primitive surface,” Journal of Applied Physics 124, 175102.
  45. Zhang, V. Nishawala, M. Ostoja-Starzewski, “Anti-plane shear Lamb’s problem on random mass density fields with fractal and Hurst effects,” Evolution Equations and Control Theory [special issue “Nonlinear Wave Phenomena in Continuum Physics: Some Recent Findings“], in press, 2018.
  46. Zhang and L. Le Marrec, M. Ostoja-Starzewski, “Mechanical and thermal couplings in helical strands,” Journal of Thermal Stresses, in press, 2018.

 

University of Connecticut

  1. Chen, R. Batra, R. Ranganathan, G. Sotzing, Y. Cao, R. Ramprasad, “Electronic Structure of Polymer Dielectrics: The Role of Chemical and Morphological Complexity”,Chemistry of Materials, Published online October 17, 2018 DOI: 10.1021/acs.chemmater.8b02997.
  2. Tefferi, M. Ghassemi, C. Calebrese, Q. Chen, Y. Cao, “Characterizations of Solid-Liquid Interface in a Wet-Mate Subsea HVDC Connector”,Journal of Electrostatics, Elsevier, Vol. 94, pp.51-59, 2018.
  3. Tefferi, M. Ghassemi, C. Calebrese, Q. Chen, Y. Cao, “Correlation between current-voltage characteristics and DC field grading for dielectric liquid used in Wet-Mate DC Connector”, IEEE Transactions on Dielectric and Electrical Insulation,Vol. 25, pp.1668-1678, 2018.
  4. Zhang, N. Uzelac, Y. Cao, “Fluoronitrile/CO2 Mixture as an eco-friendly alternative to SF6 for medium voltage switchgears”, IEEE Transactions on Dielectric and Electrical Insulation, Vol. 25, pp.1340-1350, 2018.
  5. Ghassemi, Y. Cao, Q. Chen, “A Thermo-Electrodynamic Electric Field Dependent Molecular Ionization Model to Design Electrical Insulation System of HVDC Wet-Mate Connectors under Transient Conditions”,IEEE Transactions on Dielectric and Electrical Insulation, Vol. 25, pp.476-485, 2018.
  6. Uehara, Z. Li, Q. Chen, G. C. Montanari, Y. Cao, “Space Charge Behavior under Thermal Gradient in Cross-linked Polyethylene and Ethylene-propylene Rubber”, Sensors and Materials, Vol.29, pp.1199-1212, 2017.
  7. Ghassemi, Q. Chen, Y. Cao, “The Influence of Magnitude and Rise Time of Applied Voltage and the Type of Oil on Streamer Growth in a Wet-Mate DC Connector”, IEEE Transactions on Dielectric and Electrical Insulation, Vol. 24, pp. 1646-1656, 2017.
  8. Ghassemi, M. Tefferi, Q. Chen, Y. Cao, “A Thermo-Electrodynamic Electric Field Dependent Molecular Ionization Model to Realize Positive Streamer Propagation in a Wet-Mate DC Connector”, IEEE Transactions on Dielectric and Electrical Insulation, Vol. 24, pp. 901-914, 2017.
  9. Cox, R. Fleming, F. Krajick, S. Boggs, Y. Cao, “AC and Impulse Performance of Medium Voltage Ethylene Propylene– Rubber Cables with Over 25 Years of In-Service Aging in a Wet Underground Environment”, IEEE Electrical Insulation Magazine, Vol. 32, pp. 23-27, 2016.